YXZ‑E‑4L Patient Transport Trolley: Key Features & Operational Guidance for Hospital Procurement
Core Built‑in Features of YXZ‑E‑4L Patient Transport Trolley
This transport trolley comes with factory‑integrated functional configurations as specified in official documentation:
- Collapsible safety side rails for patient protection
- Adjustable backrest and legrest sections
- Trendelenburg and Reverse Trendelenburg positioning capability (Reverse Trendelenburg range: 0°‑18° ±2°)
- Central locking wheel system
- Built‑in support for IV pole and oxygen cylinder mounting
Overall length of the trolley is documented at 2130 mm. Vascular position adjustment is supported for clinical workflow requirements.
Main Key Components
Major functional assemblies of YXZ‑E‑4L include the following parts according to product brochure:
- IV Drip Pole with Hooks
- Storage position for IV Drip Pole
- Pedal Lever for height (Hi‑lo) and Trendelenburg adjustment
- Backrest Adjustment Lever
These mechanical levers and accessories allow clinical staff to adjust bed height, patient tilt and backrest angle without extra auxiliary tools.
Official Safety Operation Guidelines
Safety instructions are excerpted directly from YXZ‑E‑4L official documentation. Operators and facility maintenance teams should observe these rules for patient safety and extended equipment service life.
Parts & Accessories
- Only use original Yongxin Med matching accessories for this trolley.
- Do not arbitrarily remove original hardware such as rubber studs, screws and nuts.
- Dismantling work shall only be performed by qualified service personnel. Unauthorised disassembly is not permitted.
- Verify all accessories are securely fitted before putting the trolley into operation.
Moving & Positioning the Trolley
- Clear obstacles from the travel path before moving the trolley.
- Always return trolley to its lowest position when the patient is left unattended, to reduce patient fall risks.
Cleaning Instructions
CAUTION: Do not use hypo‑carbonate and phenolic cleaning solutions for trolley cleaning.
Fire & Flammability Notice
Mattress and trolley upholstery components shall be kept away from naked flames and cigarettes.
Troubleshooting Rule
Fault diagnosis and repair work must only be completed by personnel qualified and authorised by Jiangsu Yongxin Medical Equipment Co., Ltd. Troubleshooting by unauthorised personnel may cause personal injury or hardware damage.
FAQ for Buyers
Q: Where can I get full specifications and IFU for YXZ‑E‑4L? A: Full technical sheets and instruction for use (IFU) are available from manufacturer Jiangsu Yongxin Medical Equipment Co., Ltd. Official website: yxmedical.com.
Q: Can I disassemble the trolley on‑site by hospital maintenance staff? A: Partial disassembly is prohibited. Only manufacturer‑qualified personnel are allowed to perform disassembly and troubleshooting work.
Q: What cleaning agents should be avoided for this patient transport trolley? A: Hypo‑carbonate and phenolic cleaning solutions are not allowed per official caution notes.
Who Is This Trolley For?
YXZ‑E‑4L patient transport trolley is designed for medical facility patient transfer scenarios, including hospital wards and clinical departments. Distributors and procurement teams can evaluate this model against their local regulatory requirements before purchase.
CTA
If you want to learn more about YXZ‑E‑4L patient transport trolley, please visit our YXZ‑E‑4L product page or contact our team to request catalog and quotation.
Disclaimer
This content is for procurement and reference purposes only. It is not medical advice. All intended equipment uses must strictly follow the official Instruction For Use (IFU) and comply with local medical device regulatory requirements. All descriptions in this article are sourced from YXZ‑E‑4L official product documentation.
Manufacturer: Jiangsu Yongxin Medical Equipment Co., Ltd. Official website: http://www.yxmedical.com/
